Jump to content

buzzman

Members
  • Content Count

    60
  • Joined

  • Last visited

Everything posted by buzzman

  1. thank you all. Did your boats rev at normal RPMs on neutral like mine and not rev over 3000rpm once in gear?
  2. Thank you again. Did you have to replace the entire pump or just the high pressure pump? Also, did your boat rev normal rpm while in neutral as mine does? Thanks! 

  3. Thank you both. Is it difficult to replace the pump as I see the part online? Can I do it myself?
  4. Boat won't go over 3000 RPM lose of power and shakes a bit. Could it be the spark plugs. 2006 signature 276 Volvo Penta 8.1 gi-g please help! Thanks
  5. Thank you all. Appreciate the quick feedback. I will let you know how it goes.
  6. Hello- my drain plug is seized and I will order a new assembly from Joe at Cecil. Any advice how to remove and replace? What type of sealant and do I drill new holes? This job has me a bit nervous. Thank you
  7. Hello I have a 2006 Sig 276 and have yet to replace the three bellows. Is it necessary to replace if they look to be in god shape. If I replace them can I do that without removing the volvo penta DPS stern drive? Thank you!
  8. Did you figure it out? Same issue just started with mine. Any suggestions?
  9. Does anyone know how I can tighten this bow rail as I am not sure how to access where the bow rail joins the side of boat? Any help would be appreciated. Thank you
  10. Hello - I went to grease the gimbal today and I pulled the tube and zerk fitting out of the drive. Do you know the part number for a new tube and zero fitting as the zero is stripped. Any advice would be great! Thank you
  11. Hello I will be removing my props this weekend and changing the oil in the drive trough the drian plug. Do you know what oil part number I use and how many quarts to order? Also, do you pump this in through the drainplug untill it reaches the dipstick? How do you know if it is filled properly. Thank you!
  12. Hello Went to winterize boat today and drain port side of engine block through the raw water drain. There is a wire attached to the drain so I am not sure how to drain it as easy as the starboard side which was a brass fitting. Any suggestions please?
  13. Hello Went to winterize boat today and drain port side of engine block through the raw water drain. There is a wire attached to the drain so I am not sure how to drain it as easy as the starboard side which was a brass fitting. Any suggestions please?
  14. Hello I had a few crazy friends kids on the boat this weekend and they punched out 2 screens from the rubber gasket. Any thoughts on how to fix or replace? Thank you
  15. Performed this fix in 3 minutes.. Thank you again capnken
  16. Hello Trying to upload photos and it says file is to large each time. Any suggestions?
  17. Thank you so much...that is great news! John
  18. Thank you delaney... I am going to go for it....go Bruins!
  19. Hello REMOTE SEARCH LIGHT JABSCO ITT 62026 The remote still moves the light but it seems as if something is broken as the light will move side to side 6 inches each way when the boat is in motion. I can also move it by hand when it use to stay stationary unless used with remote. Any suggestions?
  20. Thank you both! I will try the wet sandpaper as well as Spectrum
  21. Hello I own a 2006 signature 276 with a blue hull. Today I scratched the hull at dock. Is the hull color called atlantic blue I think?? I am trying to find a gelcoat match and I found one called spectrum and its atlantic blue. Please let me know your thoughts. Or ideas on a scratched gelcoat....any ideas on a fix would be appreciated Thanks
×
×
  • Create New...