Jump to content

CLEChap

Members
  • Content Count

    52
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    Avon Lake, Ohio
  • Interests
    2012 264 Sunesta

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Boat Bling Hot Sauce is an awesome product. I use it between washes to keep everything clean and shiny.
  2. CLEChap

    vhf marine radio

    You can go on BoatUS and register for an MMSI number. https://www.boatus.com/MMSI/MMSI/ObtainMMSI#!
  3. My favorites - Boat Wash: Meguires Boat Wash: https://www.amazon.com/Meguiars-M4364-Boat-Wash-oz/dp/B0000AXVCB/ref=sr_1_4?ie=UTF8&qid=1507581934&sr=8-4&keywords=boat+wash Wax - Meguires Flagship Wax: https://www.amazon.com/Meguiars-M6332-Flagship-Premium-Marine/dp/B0007TR47G/ref=sr_1_1?ie=UTF8&qid=1507581982&sr=8-1&keywords=meguires+flagship Between Washes - Boat Bling Hot Sauce: https://www.amazon.com/Boat-Bling-HS-Premium-Remover/dp/B006GWVBQ8/ref=sr_1_1?s=automotive&ie=UTF8&qid=1507582114&sr=1-1&keywords=boat+bling General Cleaning - Spray 9: https://www.amazon.com/Spray-Nine-26932-Marine-Cleaner/dp/B00144CZRM/ref=sr_1_2_sspa?s=automotive&ie=UTF8&qid=1507582153&sr=1-2-spons&keywords=spray+9&psc=1 Vinyl Protector - 303 Aerospace: https://www.amazon.com/303-30313-CSR-Protectant-Plastic-Fiberglass/dp/B00KN0UOEE/ref=sr_1_3?s=automotive&ie=UTF8&qid=1507582218&sr=1-3&keywords=303+aerospace+protectant Good Luck.
  4. I have removed an older pad from my boat and it was not too bad, take a look at the videos on their website to see what goes into the removal. http://www.seadek.com/t-videos-diy.aspx
  5. I have the same handheld and use heavy duty outdoor Velcro (I chose clear so it blends in when the handheld is not in place) to secure it right below the helm station. I used this method since last season and the Velcro has yet to drop the unit.
  6. It was pretty rough on Lake Erie over the weekend. Luckily for the people on this sinking boat the Miller Ferry was around to help. http://www.news5cleveland.com/news/local-news/oh-erie/miller-ferry-worked-with-coast-guard-to-help-a-submerged-boat-on-lake-erie Stay Safe.
  7. ColdOne - Can you PM me the gauge PDF, I had the same thing happen to me over the weekend. Low tank alarm went off and I had a half tank left. Thanks.
  8. Consider a Rectec Grill if you are looking at a pellet cooker. I would have gone that way if I did not go with a Primo XL Ceramic Cooker a couple years ago http://www.rectecgrills.com/
  9. 1. Mineral Spirits, 2. Spray Nine, 3. Acetone. Made pretty quick work of it.
  10. Installed today. Before and after pictures.
  11. Here is a close up of the vent piece we are referring to. I hope to get it installed in a week or two.
  12. I ordered mine over the winter with the vent cut out insert and have not installed it yet, but here is the job number on my drawings that you can refer them to: M-CHA-27744-80093-PV This is the rep I work with to place the custom order: Kelly Lafferty Customer Service Assistant Manager SeaDek Marine Products5440 Schenck AveRockledge, FL 32955321-210-7797 Direct321-632-4466 Office321-632-7019 Fax
  13. I have a 264 out of the Black River in Lorain. The size is good for most days you would want to be on the water, we go between Cleveland and the islands without any issue. I always keep an eye on the weather and make sure I have a contingency plan in mind, as the wind/weather can change quickly.
  14. Go on the Seadek website and watch the video on removing old pads. http://www.seadek.com/t-videos-diy.aspx
  15. My new Seadek swim pad arrived today for our 264 Sunesta, looks great. They did a cut out of the vent for me based on my template. I have to wait until spring to do the installation. Hope warm days come soon.
×
×
  • Create New...