Jump to content

Marc Herschberg

Members
  • Content count

    6
  • Joined

  • Last visited

Everything posted by Marc Herschberg

  1. Marc Herschberg

    Installing starter

    my Chaparral 260 SSI needs a new starter installed however the receiving female in the block is all deteriorated so it can only be bolted in by 1 Bolt. Is there any way even with lifting the engine out of the bolt that a flange can be welded on to the block so it shall be fabricated to receive the bolt? If not, are there any other ideas as starter motor must be lined up in that position to meet the flywheel?
  2. Marc Herschberg

    Installing starter

    my Chaparral 260 SSI needs a new starter installed however the receiving female in the block is all deteriorated so it can only be bolted in by 1 Bolt. Is there any way even with lifting the engine out of the bolt that a flange can be welded on to the block so it shall be fabricated to receive the bolt? If not, are there any other ideas as starter motor must be lined up in that position to meet the flywheel?
  3. Marc Herschberg

    Starter

    Installation installation of starter Motors
  4. Marc Herschberg

    Neutra salt wash

    Wondering if you're out of the product Neutra salt would it pay to wash it down just with fresh water by putting that in the canister? Would it harm anyting to wash it with fresh water I believe it's just replacing raw Water which is salt water so I don't think it should be of any detriment whatsoever.
  5. Marc Herschberg

    Marcuza

    Overheat right after new impeller installed
  6. Marc Herschberg

    Marcuza

    Overheat right after new impeller installed
×