Search the Community
Showing results for tags '2002'.
Found 3 results
I just purchased a Garmin GPSMap 741. I also purchased all of the cables to connect the chart plotter to my 2002 Mercruiser 496 mag. It is old technology I know but SmartCraft enabled none the less. I am using a CAN gateway (converts CAN to NMEA 2000 to plug into the GPS. Equipment list: Lowrance 000-0124-69 Nmea 2000 Starter Kit (000012469) Mercury-Mercruiser 8M0165589 NMEA 2000 CAN-P SmartCraft Gateway 1-4 Engines Mercruiser Quicksilver Oem Part # 84-879981T30 Harness Assy (has one resistor) Mercury Boat Terminator Smartcraft 859318B1 (the second resistor) 4-Way Junction Box Kit - 878492K14 I only have one question: Where is the CAN network connection for the SmartCraft data? I found the diagnostic port on the front of the engine. I'm looking for the 10 pin connection. Any help would be greatly appreciated.
Hi everybody, another winter project. I can't find those light fixtures bezels say any store. Any ideas about a website or a resale shop? I'm switching everything to LED but I have 4 of those burnt and I can't find full LED that fit the non flush way the old fixtures are mounted. I'd rather not cut a bigger hole in the ceiling either. And I would have non matching lights. Each LED is between 35 and 68 deers when the led "bulb" is only 20 deers. If I can only find those bezels... Thank you. PS, due to weather I haven't investigated further in the fresh water tank leak. I'll keep you posted.
Hey guys im new to this forum and this is my first post. I have a 2002 183ss and this summer we were out on the lake and the anchor door latch handle broke and the door was stuck in the closes position. After looking at it for hours trying to pry it open, i was forced to break the latch handle. During this, I chipped the fiberglass and it looks like garbage. I know i can get a fiberglass repair kit but does anyone know where i can get a new door. I attatched pictures off the chaparralboats.com "PARTS IDENTIFICATION GUIDE INDEX" http://forum.chaparralboats.com/publications/PartsGuides/Sportboat/2002/183.pdf It looks like i need #1 (183SS Anchor Lid) Part# 3-1143 Any help would be appreciated mike