Jump to content

Recommended Posts

Does anyone know where I can get the small igloo cooler that fits on my boat (310 Signature, 2013)

I cannot find that size..

Share this post


Link to post
Share on other sites

I think Cecil still has a few. They are no longer made, so the price has gone up quite a bit. 

Share this post


Link to post
Share on other sites

Should be an Igloo Marine 25.

It is out of production, and getting hard to find. The replacement model has the handles in a different location, does not fit in the Chaparral cubby.

if you find one, buy it quickly. 

brick

Share this post


Link to post
Share on other sites

I have two of them; bought a spare years ago.  On a recent outing, the admiral forgot them both! (and the food cooler).  First world problems . . . 

Share this post


Link to post
Share on other sites

I believe it is a 20 quart.

Walmart does not sell them.

I think I will replace with a soft cooler

Share this post


Link to post
Share on other sites
On 7/6/2018 at 4:16 PM, Futzin' said:

I have two of them; bought a spare years ago.  On a recent outing, the admiral forgot them both! (and the food cooler).  First world problems . . . 

lmao...

Share this post


Link to post
Share on other sites

We have two of the Igloo 36 quart marine coolers, one is a lightly used spare that just sits in the basement that I almost threw out over the weekend.  Both came from Chaparral with the boat.  The part number is A111615 per the bottom UPC, while the label on the front shows 1715207.  I don't know which is accurate.  At any rate, dimensions are approximately 22" (w) x 13" (d) x 13" (h).  If this is what you are looking for, if you pay for packing and shipping you can have it (you'll have to call the UPS store in our town)  PM if you want it.   

Share this post


Link to post
Share on other sites

CRM, thank you but that is not it, my cooler is smaller.

Curt, my cooler is 20 quarts at most, there are no identifying numbers on it.

Very generous offer, thank you.

Share this post


Link to post
Share on other sites
6 hours ago, cjm13905 said:

“Ultra” is the new, updated version of an Igloo Marine 25. Does not fit a Chaparral. Handles are in the wrong place for the Chaparral cutout. You would have to modify the cooler or the cutout.

brick

Share this post


Link to post
Share on other sites

I have replaced our Igloo that came with it with the one from Home Depot but looking at it, might be different as this was a couple years ago.  Now we use a Yeti 45. I removed one of the sides of the holding drawer and the yeti fits great.  Its heavy on the drawer mechanism for sure but I just keep an eye on the slide screws and so far so good. 

Share this post


Link to post
Share on other sites

Two years ago I bought the small Marine Ultra Igloo from Walmart as the one that came with my 05 290 was looking worn.

Fits perfectly in the intended space under the cockpit sink, even with the rubberized handles.

 Not sure if your 310 is the same size. 

Share this post


Link to post
Share on other sites

The cooler on my 2003 230 SSI was badly UV damaged.  It is the Igloo 25qt. marine cooler.  They are no longer available, neither the original or the "ultra".  Home Depot and Walmart show them online but there is no inventory.  You can find them on Amazon for ~$130, but they are new old stock from a supplier in Japan...!    What is available is the Igloo 25 qt. Contour cooler, which has handles in a different location.  This Igloo 25 qt. Contour cooler is available on Amazon for ~$20.

https://www.amazon.com/Igloo-Marine-Contour-Cooler-quart/dp/B01NAM1TNA/ref=sr_1_1?ie=UTF8&qid=1533234063&sr=8-1&keywords=igloo+25+qt+marine+cooler

Below I will describe how to modify the Igloo 25qt. Contour cooler to fit in the original receptacle on the boat.

Original cooler, note UV damage near opening:

http://pQvveUL.jpg

Contour cooler, sitting loose in receptacle:

http://QBGupT1.jpg

Mismatch in handle location:

http://jQgZc5u.jpg

Remove old handle bracket from original cooler:

http://OU3vVsu.jpg

Install bracket only on new cooler, centered under new handle, screw holes 10.25" from bottom:

http://07HxfqP.jpg

Finished job with new handle down:

http://V7eJVsR.jpg

New cooler in receptacle, note old style bracket engaged in receptacle:

http://2TbFBi3.jpg

Finished product:

http://8TUIiPO.jpg

 

Share this post


Link to post
Share on other sites

That kind of fits, the door on my boat will not close...nice job though

Share this post


Link to post
Share on other sites

@Lake guy , excellent post.  That's the kind of step by step modifications with pics that are enjoyable and very helpful.  Thanks for posting that.

Share this post


Link to post
Share on other sites

The handle is a little different but it drops in close enough to work. Exact same footprint.

Share this post


Link to post
Share on other sites

Doesn't look like that cooler exists anymore, Jeff.  Unless it's a 2013 or older that's the exact one for your boat and someone has an extra one he/she is willing to part with.

Must be really narrow if  you need it to fit flush with the outside.   Have you figured out exactly which model Igloo it is?

Share this post


Link to post
Share on other sites

A little marine te x and it will look new

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×