Jump to content


Photo

Cup Holders


  • Please log in to reply
5 replies to this topic

#1 thecardude

thecardude
  • Members
  • 97 posts
  • Location:Lake Ray Hubbard, Texas

Posted 02 July 2010 - 09:07 PM

When got our boat back from the mechanic today, I was drying it due to all the rain we had today. When I was down on the floor, I noticed that one if the plastic parts from the cup holder is missing. So now it is just a hole. Where could I get another one to replace it that would match the rest of them in the boat.

Also, another not so fun fact. Neither the glove box, the storage under the port and starboard seats in the front is waterproof. I went to get something out of there and everything was wet.

Thanks for all y'alls help!!! :thsmilie_water_119-1:
2002 186 SSi
Mercury 5.0L V8 TKS
Alpha 1 Outdrive
Tow Vehicle: 2007 Ford F-150


Posted Image

#2 gl115

gl115
  • Members
  • 5,266 posts

Posted 03 July 2010 - 04:13 AM

ask your dealer or Joe@cecil marine.

Anyone can benefit from a safe boating course.

 

 


#3 Randy

Randy

    Captain STCA

  • Members
  • 2,253 posts
  • Location:Canyon Lake, Tx

Posted 03 July 2010 - 08:44 AM

ask your dealer or Joe@cecil marine.

+1
Randy

Posted Image Posted Image

Abbie Ruth
Canyon Lake, TX
2001 Sunesta 232
5.0 Merc EFI, Alpha

"Error of Opinion may be tolerated where Reason is left free to combat it." - Thomas Jefferson

#4 Chief Plasma

Chief Plasma

    Davy Jones... "What's in your locker?"

  • Members
  • 4,062 posts
  • Location:Nashville, TN

Posted 06 July 2010 - 10:40 AM

I put some rubber around mine up front to help. I did that a while back but need to re do it.
Many on line stores have the cup holders. Their are various sizes though. so you will need to measure.
:)

1995 2130 SS Chaparral 5.7 with Yamaha Stern Drive.
2008 Dodge Ram 2500 4wd Heavy Duty w/ Crew Cab 5.7L Hemi (a beast!)
CIMG0347-1.jpgNashville.gif
05.jpg01.jpg


>>Smart Tab Install<<.......... >>My Boat Bookmarks<<


#5 professor48

professor48
  • Members
  • 1,940 posts
  • Location:Long Island NY

Posted 06 July 2010 - 11:37 AM

Anything I need to store on board that can be damaged by water I keep in ziplock bags. What I thought was a glove box under the helm of our Sig 240 turned out to be simply an access door to the fuse holders! I kept searching for the missing inner box. Coulddn't find it because it never existed. Hy
professor48

#6 billy737

billy737
  • Members
  • 1,977 posts
  • Location:Houston Texas

Posted 06 July 2010 - 11:49 AM

Change them all out.. If one was weak and broke they all will be weak and will break. Also go with the stainless it will add greatly to the look inside you boat. I just changed all mine and they look great. If you go back with plastic it will not match do to sun fading.
Posted Image Posted Image 2001 Chaparral Sign. 24
Mercruiser V-8 5.0L EFI
Bravo 3
On Lake Conroe
Just North of Houston.